MK4duo

Installing MK4duo on STM32 Cores

0 votes, average: 0,00 out of 50 votes, average: 0,00 out of 50 votes, average: 0,00 out of 50 votes, average: 0,00 out of 50 votes, average: 0,00 out of 5 (0 votes, average: 0,00 out of 5)
You need to be a registered member to rate this post.
Loading...
Shares

Launch Arduino IDE. Click on “File” menu and then “Preferences“.

The “Preferences” dialog will open, then add the following link to the “Additional Boards Managers URLs” field:

https://github.com/stm32duino/BoardManagerFiles/raw/master/STM32/package_stm_index.json

Click “Ok“. Click on “Tools” menu and then “Boards > Boards Manager“.

The board manager will open and you will see a list of installed and available boards. Select “Contributed” type.

Select the “STM32 Cores” and click on install. After installation is complete an “INSTALLED” tag appears next to the core name.

You can close the Board Manager. To upload through SWD (STLink), Serial or DFU,¬†STM32CubeProgrammer¬†needs to be installed. Now you can find the STM32 boards package in the “Board” menu.

Select the desired boards series: Example Rumba32.

Setting all option in this mode.

Upload process:

  1. Press and hold RUMBA32 BOOT button.
  2. Press and release RUMBA32 RESET button.
  3. Release RUMBA32 BOOT button.
  4. RUMBA32 is now in hardware bootloader mode and will accept firmware upload via USB DFU.
  5. Press “Upload” in Arduino IDE. If correctly configured and connected, the upload should be successful.

Previous Post

Next Post

Comments are closed.

Shares